Taser Master Instructor Practice Test

These questions are part of the practice quiz. Start practicing

• Which statement about the up selector switch before cartridge deployment is true?
• Unless interrupted by the operator, a single TASER energy weapon cycle discharges an electrical charge for how long?
• Which factor most influences the risk of adverse events when TASER is deployed?
• The selector switch placed in the down position momentarily activates what functions of the TASER 10?
• What is the recommended approach to TASER exposure duration?
• How should instructors handle misuses or policy violations observed during training?
• What should be included in debriefing after a TASER scenario drill?
• Which combination best describes core storage and maintenance considerations for TASER devices in a department?
• During a daily spark/functionality test, in addition to visually inspecting the arc you should:
• What is the purpose of a use-of-force continuum in TASER training?
• Which elements should be included in a post-incident debrief?
• In duty mode, the visual status light indicates which color?
• Agencies can use the model policy to
• If the trigger on an X26P (without an APPM installed) is held down beyond 5 seconds, what happens?
• Which factor should be considered as potentially affecting TASER outcomes during post-deployment review?
• When activated by the operator, the warning alert will produce up to 1000 lumens of pulsing light and a very loud alert sound.
• During TASER voluntary exposures, which of the following are required safety rules?
• Why is scene management critical after TASER use?
• What categories of evidence should be collected for a TASER incident to support accountability?
• A pre-shift 5-second TASER energy weapon functionality/spark test is recommended to:
• Which color is shown when the device is in function test or training mode?
• What safeguards support medical awareness and risk assessment in the Master Instructor program?
• The sensory nervous system consists of the nerves that connect which components?
• Which of the following is NOT listed as a factor influencing the decision to escalate to TASER deployment rather than verbal commands?
• What should be included in post-incident documentation to support decisions?
• Which elements should be verified before allowing TASER use in training scenarios to assess officer readiness?
• What standard governs the legality of an officer's use of force?
• List policy-required pre-deployment considerations before TASER use.
• Which action best reduces probe misfire and cartridge misplacement risks during training?
• During the window of opportunity, controlling and cuffing under power can reduce the need for repeated or extended TASER exposures.
• Explain the term 'medical distress signals' to watch for after TASER exposure.
• How long before presenting a TASER energy weapon course must an instructor check Axon Training's website to verify the program includes the most current versions of training materials?
• Can the TASER 10 display a warning alert without discharging loaded cartridges?
• Which statement is true about probe deployment and drive-stun capability?
• Who conducts the final safety check of each student in the triple safety check?
• In semi-automatic mode, what happens after a cartridge is deployed and the trigger is released?
• What characterizes objective scenario assessments?
• During a discharge cycle, if the safety switch is placed in SAFE, what happens?
• TASER energy weapons are serious weapons and are to be treated as such at all times.
• Which of the following is a function of the Arc switch on TASER devices?
• APPM is available on which TASER models?
• How often does Axon recommend docking the rechargeable battery pack?
• Which statement is true about TASER certification requirements?
• What are the department's core de-escalation principles that must be documented prior to proceeding with force?
• Which statement best characterizes the Central Nervous System?
• Which statement best describes the sensory nervous system?
• What is the recommended approach to training and certification for TASER instructors themselves?
• What ethical considerations should guide TASER use in vulnerable populations (e.g., children, elderly, persons with disability)?
• Which statement accurately describes both the sensory and the motor nervous systems?
• The policy states that operators should avoid intentionally targeting sensitive areas such as the head, throat, chest, genitals, or known injuries without legal justification.
• For back exposure targets, the guidance indicates they should be below the neck.
• After two or more cartridges are deployed, what happens when you momentarily press the selector switch?
• A blue magazine indicates which training mode?
• The Central Nervous System includes which structures?
• What is the benefit of constructive feedback with psychological safety in scenario drills?
• After TASER exposure, officers should monitor subject's condition and be prepared to respond to what?
• Identify three high-risk populations or conditions that require heightened assessment before TASER deployment.
• Instructors preparing TASER training should have which documents?
• What does the Automatic-Shutdown Performance Power Magazine (APPM) do on the TASER X2?
• Which TASER model is noted as not having drive-stun capabilities?
• Which organization has a model policy for energy weapons?
• What is the primary purpose of the CID during operation?
• Which statement about warnings before force is recommended?
• A triple safety check _______ be conducted?
• Why is it important to coordinate TASER incidents with EMS and hospital protocols?
• Which statement best describes the range of NMI effects?
• Which statement about PPM is false?
• The motor nervous system consists of nerves that go out from the spinal cord and connect to which muscles?
• If Bay #1 has already been deployed, pressing the trigger again will:
• PPM stands for what in TASER terminology?
• What term is currently used to describe the incapacitating effects of a TASER energy weapon?
• Which statement best describes the recommended action when a Critical Fault icon is displayed on the X26P CID?
• Which statement best describes the policy justification for using drive-stun?
• Which frameworks commonly govern TASER use in policing?
• When should Taser 10 battery packs be docked?
• How should instructors address excited delirium claims during post-use evaluation?
• What is the proper sequence for documenting a TASER exposure in a field incident?
• Which statement best captures the purpose of dispelling myths about TASERs in training?
• What is the definition of NMI?
• What are the described preferred target areas for TASER deployments?
• How does the Taser 10 deploy its cartridges?
• Which statement best describes the role of de-escalation in TASER decision-making?
• Which statement best describes the overall guidance on TASER deployment target areas?
• What is the exact document title participants must acknowledge reading before hands-on drills?
• What are the handheld weapons manufactured by Axon (formerly TASER) referred to as?
• Which statement about the X26P's cartridges is true?
• Cartridges are colored coded to indicate training mode.
• Which statement best describes the safe use of repeated TASER exposures?
• The Arc switch on the T7 cannot be used to:
• What are common post-use medical concerns that warrant medical assessment?
• What is a 'dynamic risk assessment' in the context of TASER decisions?
• Before applying any force, which statement best aligns with reasonable-use-of-force principles?
• What color is the magazine for live cartridges?
• Which items should supervisors review after a TASER deployment?
• How should instructors evaluate a trainee's ability to maintain procedural fairness and avoid conscious bias in TASER use decisions?
• What color is the impact sleeve used with Live and Live Training?
• What is the impact of training frequency on retention of TASER-related policies and procedures?
• Does the Taser 10's classification as Less Lethal remain valid given its firearm status?
• Which statement describes power sources PPM, TPPM, and TASER CAM for the X26P?
• Which statement about the warning arc feature on TASER X2 is true?
• What color is the magazine for halt training?
• Taser energy weapon exposure can cause which of the following?
• Which statement is true about inert training magazine color?
• Which is an appropriate practice to support accountability and safety when handling misfires or cartridge misplacements during training?
• What distinguishes immediate assistance from medical evaluation after deployment?
• How should departments preserve evidence after TASER deployment?
• Which statement best reflects the scope of medical risk education in TASER training?
• Axon Training recommends docking the rechargeable battery pack every 45 days.
• If a TASER X2 uses a PPM or TPPM power source without auto-shutdown, and the trigger is held beyond the 5-second cycle, what occurs?
• Define drive-stun and distinguish it from probe deployment in terms of policy justification.
• Which statement best describes the range of NMI effects?
• Why are times and locations important in post-incident documentation?
• Axon Training materials state that they do not establish or recommend legal standards of care, use-of-force policies, general orders, or procedures.
• Which of the following best describes the role of the supervisor in a TASER deployment record?
• What best describes the role of post-use-of-force debriefing?
• Which statement best describes the term "TASER energy weapon" in the context of Axon products?
• Does the APPM automatically stop the TASER X26P cycle after 5 seconds if the trigger is held?
• A warning arc can be displayed on the TASER X2 without discharging loaded cartridges.
• Best practices for maintaining a calm and controlled learning environment during TASER scenario drills?
• Which option accurately describes ignition risks associated with TASER devices?
• Which action is included in an immediate post-use evaluation?
• What is the potential impact of chemical/physical co-factors on TASER effects?
• Continuous training on policy changes related to TASER use is important because it...
• In TASER training, why is post-incident video review included in the process?
• What are the mandatory safety checks to perform on a TASER device before use?
• What are the key components of post-incident documentation for a non-injury TASER deployment?
• Which element is essential to include in a high-quality TASER incident report?
• What is the primary purpose of the pre-shift 5-second TASER energy weapon functionality test?
• What color is the magazine for live training?
• When a subject is wearing heavy clothing or protective gear, what should an instructor do?
• Which statement best describes post-TASER use procedures?
• When both cartridges are deployed on TASER 7 and a missed connection is detected, what does the device do?
• The triple safety check includes which of the following?
• In training and policy, how is de-escalation regarded in TASER deployments?
• What probe spread is considered optimal?
• How should instructors address a subject who refuses medical evaluation after TASER exposure?
• Identify differences between policy-compliant use of force and excessive force in TASER deployments.
• Which documentation is specifically relevant to medical findings after a TASER deployment?
• Which element should be included to reflect real-world environments?
• If an X26P has a PPM, TPPM, or TASER CAM power source (without auto-shutdown), and the trigger is held beyond the 5-second cycle, what will happen?
• How should instructors teach the concept of 'reasonable belief of threat' when considering deployment?
• In the event of a disagreement about policy within a training group, what is the recommended step?
• Is the Taser 10 classified as a firearm?
• The officer's use of force must be what, under the totality of circumstances and the officer's perception at the moment?
• APPM automatically stops the TASER cycle after 5 seconds, even if the trigger is held down.
• The X26P power source is called a Performance Power Magazine (PPM). Are there several versions of the PPM available?
• What is the role of supervisor oversight in TASER incidents?
• A warning arc can be displayed on the TASER 7 without discharging loaded cartridges.
• Explain the role of an instructor in ensuring medical monitoring is performed after a TASER exposure.
• What color is the inert training probe?
• What color is the impact sleeve used with Halt training?
• Which statement describes prohibited uses for a TASER energy weapon?
• Which statement about the cycle limit with APPM-capable devices is true?
• When collecting witness statements as evidence, which practice is most accurate?
• Axon Evidence is a program that allows agencies to
• What color is the magazine for inert training?
• A red magazine indicates which training mode?
• If a subject becomes unresponsive after TASER exposure, responders should
• What documentation must accompany every TASER deployment event?
• The motor nervous system is described as which of the following?
• When considering the use of force, which of the following statements are correct?
• Activated TASER energy weapons can ignite flammable substances including, but not limited to:
• TASER exposure cardiac arrest risk level is
• How does a Master Instructor ensure scenarios reflect real-world diversity of suspects and environments?
• Persons who are at elevated risks of secondary effects or injuries from a TASER energy weapon exposure include, but are not limited to:
• During drive-stun deployment, which practice is recommended if initial drive-stuns have no effect?
• What is a primary role of debriefing methods after use-of-force training?
• The visual status light indicator on the TASER 10 will illuminate the CID and the side rail lights in which of the following weapon modes and colors?
• Drive-Stun mode guidelines: Which statement is true?
• TASER exposure can cause physiologic effects including changes in which of the following?
• How should an instructor evaluate a trainee's ability to observe and document post-deployment signs?
• Early stun devices primarily stimulated which nervous system?
• How should instructors stay current with TASER-related policies during training?
• Describe the two primary deployment modes of a TASER and their appropriate policy context.
• How should instructors handle conflicting opinions about TASER policy within a training group?
• Post-deployment, what is required regarding medical care?
• APPM stands for Automatic-Shutdown Performance Power Feature.
• Which statements are included in Smart TASER Energy Weapon Use Considerations?
• Which statement about certification requirements for TASER use under Axon guidelines is correct?
• What should supervisors review during a TASER exposure incident review?
• Which statements are recommended to consider distance and cover?
• What statement most accurately reflects the ethical framework for TASER use with vulnerable populations?
• How should instructors address liability concerns in TASER training?
• What are common physiological effects of conducted-energy devices that instructors must recognize during training?
• Are the cartridges colored coded?
• The selector switch placed in the up position momentarily activates which functions of the TASER 10?
• When deploying probes to the front of a person's body, the weapon should generally be aimed at which area?
• What does cartridge information and lot tracking provide in incident investigation?
• If selected in Axon Evidence (Evidence.com), the Automatic-Shutdown mode will automatically stop the TASER 7 cycle after 5 seconds even if the trigger is held down.
• Live training uses which magazine color and which impact sleeve color?
• If you observe a purple magazine, what training are you conducting?
• Operators should avoid repeated exposures unless necessary to counter an immediate threat or is otherwise legally justified.